Dantek 10/100Base-TX/FX Bridg Media Converter complies with IEEE802.3 and IEEE 802.3u Standards. MC series enables network managers to connect 10 Mbps and 100 Mbps twisted pair network segments and active equipment to fiber optic cabling more cost-effectively than ever.WDM Technology Combines Dual Fiber Cables into Single Fiber .Greatly save the Installation cost of Expensive Fiber Cable.  Both a media and data rate converter, MC series features 10/100 auto-negotiation on the twisted pair port while the fiber port operates at 100 Mbps. MCI series converters are ideal for any premises FTTD, LAN-to-LAN or LAN-to-WAN fiber networking applications. 

1.KEY FEATURES

Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX
10/100Mbps and full/half duplex automatically configure in TP port
MDI/MDI-X Auto Negotiation

Max transmit packet(s):1600bytes
WDM Technology Combines Dual Fiber Cables into Single Fiber .Greatly save the Installation cost of Expensive Fiber Cable

LFP Function(Link fault pass through)

 1. ON--- The function is usable.

TX=>Fiber : If TX port link down , then converter will forced fiber to link down.
Fiber =>TX: If Fiber port link down, the media converter will forced TX port to link down.

2. OFF---The function is disable

Notice: when you turn the switch to ON or OFF to change current mode, please make sure power turn off and turn on again!

2. TECHNICAL SPECIFICATION

Fiber optic details:

Multimode 2 Km Min TX TWR: -14dB Max Tx PWR -8dB Rx-sensitivity (-32dBm) Link Budget ( 18.0dB)

Single mode 20 Km Min TX TWR: -15dB, Max Tx PWR -8dB, Rx-sensitivity (-32dBm), Link Budget ( 17.0dB)

Single mode 40 km Min TX TWR: -10dB, Max Tx PWR -6dB, Rx-sensitivity (-34dBm), Link Budget ( 24.0dB)

Single mode 60 km Min TX TWR: -5dB, Max Tx PWR 0dB, Rx-sensitivity (-34dBm), Link Budget ( 29.0dB)

Single mode 80 km 1550nm DFB laser, Min TX TWR: -5dB, Max Tx PWR db,  Rx-sensitivity (-34dBm), Link Budget ( 29.0dB)

3.ORDERING INFORMATION