Dantek MTF-A3 is used to convert multi-mode fiber signal to single-mode or single-mode fiber signal to single-mode equivalent that extends the long span fiber connections easily and inexpensively. This media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack (up to 14 units) for use at a central wiring closet.

1. Key Features

Support 1000Base-SX/LX Multi-mode to Single-mode

Support 622M SONET OC-12 multi-mode to single-mode conversion

Support 155M ATM OC-3/ 100M Fast Ethernet multi-mode to single-mode conversion

Easy Fiber Transceiver Upgradeable

Good for Application to Extend the Network Distance Up to 70Km
Standalone or composite applications

2. TECHNICAL SPECIFICATION

Standards Compliance IEEE 802.3z

Gigabit Ethernet 1000Base-SX/LX

Data Transfer Rate：2000Mbps/Full-duplex

622M SONET OC-12

155M OC-3/STM-1 / IEEE802.3u 100Base-FX

Network Interface

 LC Connector

Fiber Cable:
50/125, 62.5/125, or 100/140μm (multi-mode)
8.3/125, 8.7/125, 9/125 or 10/125μm (single-mode)

Data Transfer Rate: 100Mbps, 155Mbps, 622 Mbps, 1000 Mbps

LED Indicators: PW1,Tx/Fail, Rx/Fail, PW2, Tx/Fail, Rx/Fail,

Power Requirement: 2.0A@+5VDC
Ambient Temperature: 0 to 50°C
Humidity: 5% to 90%
Dimensions: 26.2(H) x 70.4(W) x 94(D) mm
Certification: FCC Part 15 Class A, CE Mark

3.ORDERING INFORMATION

MTF-A3-10 Multimode To Single Mode Gigabit Fiber Converter SM   FP laser 10km LC Connector

MTF-A3-70 Multimode To Single Mode Gigabit Fiber Converter SM DFB laser 70km LC Connector